LINK-D15 · Accessories & Components
A replacement, service, interface, or modular accessory for a documented product or system.
Why operators make room for it
The small part that keeps a proven setup in service
The smallest missing interface, replacement part, or service component can stop an otherwise complete field station at the tailgate.
The CHA LINK-D15 is a high-performance linked dipole antenna extension designed exclusively for use with the CHA LEFS 4010 system. Engineered for rapid deployment and multiband operation, the LINK-D15 allows amateur radio operators to seamlessly operate on the 40 meter , 20 meter , and 15 meter HF bands without requiring an antenna tuner.
The operator gets a specific way to complete, adapt, or maintain the intended product without confusing physical fit with full RF, power, environmental, or structural compatibility.
Quick product reference
Key Specifications
- Product type
- Accessories & Components
- Primary role
- A replacement, service, interface, or modular accessory for a documented product or system.
- Color
- yellow; blue; orange
- Published package contents
- Two pre-measured wire elements (20 gauge PTFE wire)
- One winder
- Band link jumpers with durable alligator clips
- Pre-installed terminal lugs
- Stainless steel carabiners
- Quick start setup guide
- Selection rule
- Confirm product family, revision, interface, size, and quantity
- Compatibility
- Verify electrical, power, and structural requirements where applicable
- Component role
- Replacement
- service
- interface
- or modular part for a documented product or system
- Selection checks
- Confirm product family, revision, interface, material, size, and quantity
Operator decision support
Plan the complete setup
See what this product is best suited for, what the documented setup needs, and the boundaries to confirm before deployment.
- Best for
The smallest missing interface, replacement part, or service component can stop an otherwise complete field station at the tailgate.
- What’s included
- Two pre-measured wire elements (20 gauge PTFE wire)
- One winder
- Band link jumpers with durable alligator clips
- Pre-installed terminal lugs
- Stainless steel carabiners
- Quick start setup guide
- What else you need
Confirm product family, revision, interface, size, and quantity
- Compatible with
- The CHA LINK-D is exclusively designed for use with the CHA LEFS 4010 , utilizing its dipole attachment terminals and second BNC coaxial connector as shown on the CHA LEFS 4010 Operator’s Manual
- Verify electrical, power, and structural requirements where applicable
What an operator can do
- Confirm the exact product, revision, interface, size, quantity, and position the component is intended to serve.
- Install it according to the completed product or system guide.
- Treat physical fit as only one part of compatibility; verify electrical, power, and structural requirements where applicable.
Complete product details
CHA LINK-D15 (Linked Dipole)
Multi-Band Resonant Dipole Add-On for CHA LEFS 4010
Covers 40M, 20M, and 15M Bands — No Antenna Tuner Required
The CHA LINK-D15 is a high-performance linked dipole antenna extension designed exclusively for use with the CHA LEFS 4010 system. Engineered for rapid deployment and multiband operation, the LINK-D15 allows amateur radio operators to seamlessly operate on the 40 meter, 20 meter, and 15 meter HF bands without requiring an antenna tuner.
Built for field communication, portable deployment, and emergency response, this antenna extension offers exceptional reliability, fast configuration, and a rugged design that meets the demands of both professional and recreational operators.
Multiband Performance Without a Tuner
The CHA LINK-D15 uses precision-measured wire segments and preinstalled band links to enable optimized operation across three popular HF bands. With no need for tuning or additional equipment, operators can quickly switch bands by adjusting the integrated alligator clip jumpers, giving them the flexibility they need in real-time scenarios such as POTA activations, SOTA excursions, EMCOMM field stations, or backcountry communication.
Flexible Installation Options
The antenna can be installed in a horizontal or inverted-V dipole configuration, depending on available space and operating goals. Sturdy carabiners and strain relief holes provide solid wire support, while terminal lugs ensure reliable, corrosion-resistant electrical connections at each segment.
The center feed point is fitted with a BNC connector, making it compatible with a wide range of portable and stationary transceivers and feedlines.
Simple Band Switching
Operators can change bands by setting or removing the supplied link jumpers. The configuration chart is as follows:
| Band | 15 to 20 Meter Link | 20 to 40 Meter Link |
|---|---|---|
| 15 Meters | Open | Open |
| 20 Meters | Connected | Open |
| 40 Meters | Connected | Connected |
This setup ensures rapid reconfiguration in the field with minimal interruption, eliminating the need for SWR adjustments or antenna retuning.
Package Contents
- Two pre-measured wire elements (20 gauge PTFE wire)
- One winder
- Band link jumpers with durable alligator clips
- Pre-installed terminal lugs
- Stainless steel carabiners
- Quick start setup guide
Ideal Use Cases
The CHA LINK-D15 is ideal for:
- Parks on the Air (POTA) and Summits on the Air (SOTA)
- Emergency communications (EMCOMM)
- Temporary field stations
- Amateur radio hobbyists seeking tuner-free operation
Technical Highlights
- Bands supported: 40M, 20M, 15M
- Tuner required: No
- Configuration: Dipole (horizontal or inverted-V)
- Connector type: BNC (center feed on the LEFS 4010)
- Installation time: Under 5 minutes with practice
- Designed and manufactured in the USA
Compatibility
The CHA LINK-D is exclusively designed for use with the CHA LEFS 4010, utilizing its dipole attachment terminals and second BNC coaxial connector as shown on the CHA LEFS 4010 Operator’s Manual.
