Skip to content

Chameleon Knowledge Base · The Complete Online HF Antenna Handbook

CHA BV Portable Deployment Guide

CHA BV Portable Deployment Guide follows the documented CHA BV workflow; it is not permission to improvise a neighboring antenna.

Portable Operating CHA BV (Basic Vertical) Reviewed 2026-07-14
In plain language: CHA BV Portable Deployment Guide follows the documented CHA BV workflow; it is not permission to improvise a neighboring antenna.

A clean deployment begins before the whip is raised. Confirm the footprint, mounting surface, return-wire routes, overhead clearance, and a safe way to lower the system.

The CHA BV is for operators who want a straightforward resonant vertical without giving up the ability to change the system later. The standard kit brings together the CHA BLANK feed point, SS17 whip, M-COIL, PUCK HUB, four 12.5 ft radials, spike, tent stakes, and 12 ft choked RG-58 coax.

What matters in this configuration

  • Lay out the complete footprint before raising the radiator.
  • SS17 Basic Vertical for 40–6 m, using M-COIL on 40 and 30 m.
  • SS17 plus CHA LZ SLOPER as the guide-defined 60, 75, or 80 m inverted Lazy-L; SS25 is not recommended for this configuration.
  • Optional SS25 with the distinct red-covered M25-COIL for a 40–6 m resonant vertical.
  • Keep RF connections free of mechanical strain and preserve a controlled lowering path.

Why this choice matters

CHA BV is a resonant, single-band-at-a-time MPAS READY vertical that covers 40 through 6 meters in its documented SS17 configuration and can grow into other guide-defined builds. The useful result comes from the complete documented system rather than any one threaded component.

The parts that make it a complete antenna

  • CHA BLANK feed-point adapter
  • CHA SS17 telescoping whip
  • CHA M-COIL for 30 and 40 meters
  • CHA PUCK HUB and four 12.5 ft banana-plug radials
  • CHA SPIKE, four tent stakes, and line winders
  • 12 ft RG-58 coax with an integrated RFI choke

Use the result in the field

Record the exact radiator, loading or feed-point hardware, return system, mount, feed line, band, dimensions, and final measurement. Repeatability is more valuable than a one-time low SWR reading.

Before you transmit

  • Confirm whether the build uses SS17 with M-COIL or SS25 with M25-COIL.
  • Use the guide table for the selected band, whip length, radial count, and radial length.
  • Keep the supplied feed-point choke in the coax path.
  • Inspect the mount, threads, whip, radials, and clearances before transmitting.
  • Sweep broadly at low power and change one variable at a time.
Boundary: SS17/M-COIL and SS25/M25-COIL are different electrical configurations. Similar appearance or the same thread does not make the coils interchangeable.
Use the current source before deployment.

This lesson explains the decision in plain language. The current product guide controls assembly, settings, ratings, and safety.

Open the CHA BV User Guide · View the current product page

Continue learning

Back to the Knowledge Base