Skip to content

Chameleon Knowledge Base · The Complete Online HF Antenna Handbook

CHA EMCOMM III Portable Frequently Asked Questions

CHA EMCOMM III Portable Frequently Asked Questions should be decided from the operating job and available site—not from wire length or one headline band alone.

Product Installation Guides CHA EMCOMM III Portable Reviewed 2026-07-14
In plain language: CHA EMCOMM III Portable Frequently Asked Questions should be decided from the operating job and available site—not from wire length or one headline band alone.

The better purchase is the antenna that fits the operator’s recurring job. More wire or a wider frequency label is not automatically more useful.

The CHA EMCOMM III Portable gives a field station more wire and more deployment choices than the smaller EMCOMM II V2 while remaining a one-pound, one-operator system. Its 73 ft radiator, transformer, line winder, and suspension hardware are designed to move from a backpack to an operating site in under 15 minutes.

What matters for this decision

  • Choose the shortest, lightest system that still supports the required bands and path.
  • Count the actual supports and usable height at the site.
  • Include coax, return conductors, line, stakes, tuner, weather protection, and recovery time in the comparison.
  • Inverted-L or sloping wire: deliberate general-purpose layouts, normally raised around 25 ft or higher; one or two supports depending on shape.
  • End-fed inverted-V: a hasty medium-range compromise using one center support, with the far leg and return path arranged from the transformer.
  • Horizontal NVIS: low horizontal deployment intended for strong high-angle regional work when propagation permits.

Why operators choose this system

The operator can choose a sloping wire or inverted-L when there is time to use one or two supports, an end-fed inverted-V when one center support and a faster layout make more sense, or a horizontal NVIS arrangement when regional coverage is the priority.

Published operating reference

  • Published continuous frequency range: 1.8–55 MHz.
  • Published power: 50 W continuous duty and 100 W intermittent duty.
  • Published wire length and weight: 73 ft and approximately 1 lb.
  • Published setup: one trained operator in less than 15 minutes.

Make the next deployment repeatable

Record product revision, configuration, wire dimensions and bearings, endpoint heights, support hardware, return path, coax and choke condition, tuner state, analyzer reference plane, weather, and on-air reports.

Boundary: The 73 ft radiator may be a radiator or, in the documented horizontal NVIS arrangement, part of a complete radiator/return topology. That does not make every 73/25 ft combination automatically approved.
Keep the current guide with the station.

This lesson explains the operating choice in plain language. The current guide still controls assembly, dimensions, power limits, and safety.

Open the EMCOMM III Portable User Guide 250519 · View the current product page

Continue learning

Back to the Knowledge Base