Fit is only the first check: CHA HD GUY CLAMP is the two-piece mast ring used to connect the UGS three-line system to larger CFM masts. It creates a deliberate guy point without drilling or improvising attachments on the carbon-fiber tube.
Documented relationships
- The clamp is documented with CFM-34, CFM-34HD, and the UGS guy-line system.
- Its physical diameter range does not approve every mast material or load.
- The antenna-specific height and guying restrictions still control.
- Do not substitute generic clamps or fasteners.
Interfaces to verify
- Choose it for the CFM-34 or CFM-34HD path described by the UGS and mast guides.
- Confirm the selected mast section is the documented 24-26 mm diameter at the correct guying height.
- Use all supplied stainless hardware and three carabiners.
- Do not treat the clamp as a lifting point, antenna bracket, or reason to exceed the mast rating.
What compatibility does not mean
- A matching thread or tube diameter does not prove structural capacity.
- A stable mount does not replace the required feed, matching, radiator, or RF-return components.
- An adapter does not transfer the highest rating of one product to the rest of the chain.
- Use the exact antenna, height, load, wind, and guying limits from every current guide.
Use the current CHA HD GUY CLAMP instructions.
