Skip to content

Chameleon Knowledge Base · The Complete Online HF Antenna Handbook

CHA LEFS FEATHER Inspection, Recovery, and Maintenance

The next CHA LEFS FEATHER deployment starts with how the previous one was recovered.

Maintenance & Repair CHA LEFS FEATHER Reviewed 2026-07-14
Start with the operator’s decision: The next CHA LEFS FEATHER deployment starts with how the previous one was recovered.

How this exact system works

Disconnect both coax ends, roll the coax without twisting it, lower the far end, wind the wire and paracord on the combined insulator/winder, clean and inspect the wire, S-Biner, transformer, BNC, and tuning stub, then keep the complete antenna together.

The boundary that prevents mistakes

Published power is 25 W SSB and 10 W CW or digital. The guide lists 40, 20, 15, and 10 meters without a tuner; 30, 17, 12, and the upper 10-meter FM segment require a tuner. This guide documents a sloper, not a generic horizontal/NVIS configuration.

Use this field sequence

Quarantine damaged parts, label settings and matched components, update the kit inventory and field record, and do not return the system to service until the exact fault is corrected.

Source boundary

CHA LEFS FEATHER Operator’s Manual, Rev. 3/30/2026. The exact current product, components, band, feed, support, geometry, and operating limits control; physical fit does not establish compatibility.

Continue learning

Back to the Knowledge Base