Skip to content

Chameleon Knowledge Base · The Complete Online HF Antenna Handbook

CHA LINK-D15 Product DNA: Complete System Overview

CHA LINK-D15 gives the LEFS 4010 End Assembly a selectable resonant dipole for 40, 20, or 15 meters when those three popular bands match the activation plan.

Product Installation Guides CHA LINK-D15 Reviewed 2026-07-14
Read the complete product technical record
Start with the operator’s decision: CHA LINK-D15 gives the LEFS 4010 End Assembly a selectable resonant dipole for 40, 20, or 15 meters when those three popular bands match the activation plan.

How this exact system works

Two linked legs use the DIPOLE wing nuts and the feed line uses the DIPOLE BNC. The link state must match on both sides and the supported configurations are horizontal or inverted-V. Treat the product as a complete documented system: feed point, radiator, return or balanced second leg, feed line, support, geometry, power, and environment all matter.

The boundary that prevents mistakes

This is not LINK-D with an extra band and it is not simultaneous multiband hardware. Do not hot-switch or infer compatibility from shared BNC and terminal hardware.

Use this field sequence

Set the intended band before raising the antenna, keep the legs symmetrical, support the center independently from the coax, and measure after final height and angle are established.

Source boundary

CHA LEFS 4010 User Guide 250609. The exact current product, components, band, feed, support, geometry, and operating limits control; physical fit does not establish compatibility.

Continue learning

Back to the Knowledge Base