Start with the practical answer: RF feedback means unintended RF current or voltage is reaching equipment, audio, control, computer, or operator paths; correct the current path and bonding problem instead of masking the symptom in software.
What changes the result
Separate the station into power/source, feed line, matching, radiator, return, environment, and propagation so one symptom is not mistaken for another.
The mistake to avoid
Do not transmit into an uncertain, arcing, hot, unstable, or exposure-unsafe system, and do not use a tuner to hide an unresolved fault.
Use this operating sequence
Capture a known-good baseline, remove RF, restore the exact configuration, inspect and measure from radio outward, substitute one known-good part at a time, then document the correction.
Source boundary
Current controlled CKB RF engineering, VHF/UHF, operating, and diagnostic references. Confirm current local coordination, band plans, satellite data, and equipment documentation before operating.
