B-SC-4830JUD (12V/24V/36V/48V, 30A Solar Charge Controller for LiFePO4) · Power
A battery, charger, controller, solar panel, filter, or station-power component.
Why operators make room for it
Give the radio quiet, deliberate power away from the grid
Away from the grid, every amp-hour, connector, charging source, and transmit duty cycle becomes part of the station design.
That is where B-SC-4830JUD (12V/24V/36V/48V, 30A Solar Charge Controller for LiFePO4) enters the kit. Bioenno Power 12V/24V/36V/48V, 30A Solar Charge Controller (Model SC-4830JUD) is a versatile controller for use in solar systems with an integrated LCD display , that is designed to charge LiFePO4 (Lithium Iron Phosphate) batteries (and AGM/SLA batteries)! This solar controller accepts either 12V/24V/36V/48V input from solar panels and can handle up to 30 Amps.
For the operator, the goal is quiet and predictable endurance: enough correctly managed energy for the real radio load, with polarity, current, chemistry, charging, and protection handled deliberately.
Quick product reference
Key Specifications
- Product type
- Power
- Primary role
- A battery, charger, controller, solar panel, filter, or station-power component.
- Selection rule
- Match chemistry, voltage, current, connector, and charging source
- Runtime
- Depends on radio load and transmit duty cycle
- Electrical role
- Battery, charger, controller, solar, filtering, or station-power component
- Compatibility checks
- Match chemistry, nominal voltage, current, polarity, connector, charger, and controller
- Protection
- Use the specified fuse, conductor size, ventilation, and charging limits
- Runtime planning
- Calculate from the radio load and actual transmit duty cycle
Operator decision support
Plan the complete setup
See what this product is best suited for, what the documented setup needs, and the boundaries to confirm before deployment.
- Best for
Away from the grid, every amp-hour, connector, charging source, and transmit duty cycle becomes part of the station design.
- What else you need
Match chemistry, voltage, current, connector, and charging source
- Compatible with
Match chemistry, nominal voltage, current, polarity, connector, charger, and controller
What an operator can do
- Match battery chemistry, voltage, current capacity, connectors, charger, and controller to the station load.
- Protect every circuit with the specified polarity, fuse, cable size, ventilation, and charging limits.
- Estimate operating time from the actual transmit duty cycle rather than a maximum nameplate figure alone.
Complete product details
Bioenno Power 12V/24V/36V/48V, 30A Solar Charge Controller (Model SC-4830JUD) is a versatile controller for use in solar systems with an integrated LCD display, that is designed to charge LiFePO4 (Lithium Iron Phosphate) batteries (and AGM/SLA batteries)! This solar controller accepts either 12V/24V/36V/48V input from solar panels and can handle up to 30 Amps. Featuring our proprietary CC/CV (Constant Current/Constant Voltage) circuitry, the solar controller provides a regulated voltage output for charging 12V or 24V or 36V or 48V LiFePO4 (and AGM/SLA batteries). The solar controller also provides a regulated 12V or 24V or 36V or 48V output for electrical loads (depending on whether a 12V or 24V or 36V or 48V battery is used). Solar controllers are required for all solar systems in order to maintain a regulated output voltage to charge batteries and for maintaining a regulating output voltage for loads.
Please note that for any solar setup in which you are using a panel in conjunction with a battery and/or a load a solar charge controller is absolutely necessary. DO NOT plug a panel directly into your battery or your load!
This controller does not boost voltage from the solar panel, but instead will regulate a panel voltage ranging from 17V to 50V (open circuit) downwards to the correct charging voltage for the battery.
