BLF-1220A (10 hours on HF SSB at 20% TX and 80% RX)

The Bioenno Power Lithium Iron Phosphate (LiFePO4) Battery Model BLF-1220A is a state-of-the-art 12V 20Ah battery. The BLF-1220A is the entry level unit of Bioenno Power's high-power 12V battery line designed for more stationary applications and higher power consumption portable electronics requiring a higher capacity and greater power output battery while demanding a battery which can reliably provide excellent performance over an extended service life. The battery has an integrated PCM (protection circuit module) which provides complete internal cell balancing, complete integrated protection along with integrated charge circuitry and boasts no EMI/RFI (Electromagnetic Interference/Radio-Frequency Interference) and is absolutely quiet! This unit has available a 110VAC/220 VAC AC-to-DC charger, that provides 4A, with a DC Plug. Please note that this battery should be charged using a LiFePO4 compatible charger, and not with a charger for SLA batteries.

Includes built-in PCM (protection circuit module) which provides internal cell balancing and management, protection from overcurrent, undervoltage (overdischarge), overvoltage and short circuiting, and has integrated charging circuitry
Available 110VAC / 220 VAC Charger

Battery Specifications

• Voltage: 12V
• Capacity: 20Ah
• Case Type: PVC Pack
• Charge Connector: DC Barrel Plug
• Discharge Connector: Anderson Powerpole
• Maximum Continuous Discharge Current: 40A (make sure your electrical load consumes less than 40A)
• Maximum Power Delivered to Load at 12V: 480 Watts (12V x 40A = 480 Watts)
• Maximum Peak Discharge Current: 60A (3 sec)
• Dimensions:(L x W x H) 6.5 in. x 4.31 in. x 3.3 in. (160 mm x 108 mm x 83 mm)
• Weight: 5.4 lbs. (2.4 kg.)
  
  

Compatible AC-to-DC Charger Specifications

• Input Voltage: 110VAC/120VAC
• Output Voltage: 14.6VDC
• Current: 4A
• Connector: DC Plug

IMPORTANT

In practice if you are not using the battery for more than 3 months, simply top off the battery using the BPC- wall charger every 3 months. You do not need to leave the BPC- wall charger attached to the battery all the time. Simply top off using the BPC- wall charger, the LED light on the charger turning from red to green. The 50% rule is only needed if you will not be using the battery for more than 1 year. In that case, you will need to discharge the battery to about 12.8 VDC and then disconnect the wall charger from the battery and store.