BPC-1502DC · Power
A battery, charger, controller, solar panel, filter, or station-power component.
Why operators make room for it
Build operating time into the field plan
Operating time is not an abstract battery number when the activation, emergency net, or camping trip is still underway.
Bioenno Power offers 14.6VDC, 2A AC-to-DC chargers for LiFePO4 batteries. Model BPC-1502DC uses a DC plug barrel connector. The charger provides 14.6VDC, 2A (CC/CV charge profile) for charging LiFePO4 batteries. This charger accepts 110~220VAC input, for use worldwide.
For the operator, the goal is quiet and predictable endurance: enough correctly managed energy for the real radio load, with polarity, current, chemistry, charging, and protection handled deliberately.
Quick product reference
Key Specifications
- Product type
- Power
- Primary role
- A battery, charger, controller, solar panel, filter, or station-power component.
- Connector
- DC Plug
- Dimensions
- (L x W x H) 5.25 in. x 2.25 in. x 1.125 in. (133.35 mm. X 57.15 mm X 29.00 mm)
- Weight
- 1 lb. (0.45 kg.)
- Selection rule
- Match chemistry, voltage, current, connector, and charging source
- Runtime
- Depends on radio load and transmit duty cycle
- Electrical role
- Battery, charger, controller, solar, filtering, or station-power component
Operator decision support
Plan the complete setup
See what this product is best suited for, what the documented setup needs, and the boundaries to confirm before deployment.
- Best for
Operating time is not an abstract battery number when the activation, emergency net, or camping trip is still underway.
- What else you need
Match chemistry, voltage, current, connector, and charging source
What an operator can do
- Match battery chemistry, voltage, current capacity, connectors, charger, and controller to the station load.
- Protect every circuit with the specified polarity, fuse, cable size, ventilation, and charging limits.
- Estimate operating time from the actual transmit duty cycle rather than a maximum nameplate figure alone.
Complete product details
Bioenno Power offers 14.6VDC, 2A AC-to-DC chargers for LiFePO4 batteries. Model BPC-1502DC uses a DC plug barrel connector. The charger provides 14.6VDC, 2A (CC/CV charge profile) for charging LiFePO4 batteries. This charger accepts 110~220VAC input, for use worldwide.
Specifications
- Input: 110VAC/220VAC
- Output: 14.6VDC, 2A (CC/CV Charge Profile for LiFePO4 Batteries)
- Connector: DC Plug
- Dimensions:(L x W x H) 5.25 in. x 2.25 in. x 1.125 in. (133.35 mm. X 57.15 mm X 29.00 mm)
- Weight: 1 lb. (0.45 kg.)
