CARBON FIBER TRIPOD · Masts & Infrastructure
A portable mast, tripod, guying, or infrastructure product that supports a documented antenna load.
Why operators make room for it
Give a portable vertical a stable feed point without carrying a full-size tripod
Portable vertical antennas become much easier to use when the feed point has a stable home. The CHA CARBON FIBER TRIPOD creates that low, compact support without forcing an operator to carry a surveyor tripod, drive a spike into the ground, or improvise a base from whatever happens to be nearby. It is especially useful on a patio, campsite, picnic table area, balcony, hard-packed surface, or any operating position where a small freestanding footprint is more practical than a ground mount.
The tripod weighs just over one pound, folds to approximately 8 1/4 inches, adjusts from about 11 to 17.3 inches, and uses 10-ply carbon-fiber legs with a machined aluminum base. Its supplied interface accepts both 1/4-20 equipment and the 3/8-24 Chameleon ecosystem, giving one compact support more than one job in a travel or field kit. The published static load rating is up to 22 pounds, but antenna height, leverage, wind, uneven ground, and the complete installed configuration still govern safe use.
For amateur-radio use, the guide shows the 3/8-24 adapter supporting a CHA HYBRID-MICRO, CHA HYBRID-MINI, CHA BLANK, or CHA MCC at the feed point. That creates practical paths for documented portable vertical systems, including supported CHA PRV 2.0 and CHA BV configurations, as well as other complete builds that use those feed-point components. The tripod's real value is not the carbon fiber by itself—it is the antenna position it makes possible.
Choose the CHA CARBON FIBER TRIPOD when pack size matters, the antenna needs a low and stable feed point, and a larger support would be unnecessary. It gives a new customer a clear starting platform and gives an existing Chameleon owner another way to deploy compatible MPAS READY components in places where a spike, clamp, or full-size tripod is inconvenient. Follow the current guide for the complete antenna, and stabilize or guy the installation whenever the radiator, wind, or site creates more leverage than the small footprint can safely manage.
Quick product reference
Key Specifications
- Product type
- Masts & Infrastructure
- Primary role
- A portable mast, tripod, guying, or infrastructure product that supports a documented antenna load.
- Published package contents
- 1 X CARBON FIBER TRIPOD
- 1 X TRIPOD ADAPTOR
- 1 X CARRY BAG
- 1 X 3/32 ALLEN KEY
- 2 X 5/32 ALLEN KEY
- RF role
- Mechanical support; supported antenna determines frequency and power
- Safety
- Keep the support and antenna away from power lines
- Structural role
- Portable support; the attached antenna determines the electrical specifications
- Load planning
- Verify antenna mass, wind area, leverage, extension height, surface, and weather
- Mounting requirement
- Use the documented base, sleeve, tripod, stake, clamp, or vehicle interface
Operator decision support
Plan the complete setup
See what this product is best suited for, what the documented setup needs, and the boundaries to confirm before deployment.
- Best for
Height, stability, wind area, and setup time all become part of antenna performance when the support travels with the station.
- What’s included
- 1 X CARBON FIBER TRIPOD
- 1 X TRIPOD ADAPTOR
- 1 X CARRY BAG
- 1 X 3/32 ALLEN KEY
- 2 X 5/32 ALLEN KEY
- What else you need
Use the documented base, sleeve, tripod, stake, clamp, or vehicle interface
- Limitations
Keep the support and antenna away from power lines
What an operator can do
- Raise documented wire antennas or approved elevated systems within the support's load, height, wind, and guying limits.
- Select the approved base, sleeve, tripod, stake, or mount for the support and terrain.
- Keep conductive supports and every attached antenna safely away from power lines.
Complete product details
Introducing our Ultra-light Portable CARBON FIBER TRIPOD – a compact marvel designed for those on the move. Weighing just over 1lb and folding down to 8 1/2", it's your perfect outdoor companion.
Built for Strength and Durability, with 10-ply carbon fiber legs and a CNC-machined aluminum base, this tripod can handle up to 22lbs.
The 2-in-1 Interface (1/4" and 3/8" screws) ensures compatibility with a wide range of equipment, and easy switching between them.
Plus, it comes with our TRIPOD ADAPTOR for seamless attachment to any 3/8-24 threaded product on your tripod or mount with a 1/4-20 connection.
Adjustable height from 11" to 15 1/4", versatile tube legs, and a stable, no-central-axis design make it a breeze to set up.
Elevate your creativity with this ultra-portable, robust tripod – your go-to solution for dynamic stability anytime, anywhere.
Consist of:
-
1 X CARBON FIBER TRIPOD
-
1 X TRIPOD ADAPTOR
-
1 X CARRY BAG
-
1 X 3/32 ALLEN KEY
- 2 X 5/32 ALLEN KEY
