CHA DIY RADIAL/COUNTE POISE KIT
"Very well made. Arrived quickly, Great Product."
DIY RADIAL/COUNTERPOISE KIT · Counterpoise & Radials
A radial or counterpoise component for documented unbalanced antenna configurations.
Why operators make room for it
Build repeatability underneath an unbalanced antenna
A field antenna is not complete simply because the vertical element is standing upright.
That is where CHA DIY RADIAL/COUNTERPOISE KIT enters the kit. Create your own RADIAL/COUNTERPOISE KIT w/ banana plugs, The kit contains the following: With Screw Banana Plugs SOLDERLESS 1 X 100' Tinned Copper KEVLAR PTFE (Teflon) 20 gauge (-70°C to 150°C) 6 X WINDERS 6 X BANANA PLUGS (4mm, Double Screws to Secure Wire) 1 X SCREWDRIVER 6 X HEAT SHRINK 6 X CHA ISOLATION RINGS 6 X ALUMINUM CRIMPING LOOP SLEEVES With SOLDER Banana Plugs 1 X…
The operator gains a deployable, understandable ground-side system that can be laid out consistently and adjusted only where the official antenna configuration permits it.
Quick product reference
Key Specifications
- Product type
- Counterpoise & Radials
- Primary role
- A radial or counterpoise component for documented unbalanced antenna configurations.
- Color
- beige; green; orange; yellow
- Available color
- Tan
- OD Green
- Orange
- Yellow
- Applicable systems
- Documented unbalanced antenna configurations
- Dipole exclusion
- Do not add radials or a counterpoise to a balanced dipole
- System role
- Return-path component for documented unbalanced antenna configurations
- Deployment variables
- Quantity, length, spacing, pattern, ground contact, and connection point are configuration-specific
Operator decision support
Plan the complete setup
See what this product is best suited for, what the documented setup needs, and the boundaries to confirm before deployment.
- Best for
A field antenna is not complete simply because the vertical element is standing upright.
- What else you need
Connect it only at the documented ground or counterpoise point and keep it clear of trip hazards.
What an operator can do
- Lay out the wire or radial system in the quantity, length, and pattern specified by the completed antenna guide.
- Connect it only at the documented ground or counterpoise point and keep it clear of trip hazards.
- Do not add radials or a counterpoise to a balanced dipole configuration.
Complete product details
Create your own RADIAL/COUNTERPOISE KIT w/ banana plugs,
The kit contains the following:
With Screw Banana Plugs SOLDERLESS
- 1 X 100' Tinned Copper KEVLAR PTFE (Teflon) 20 gauge (-70°C to 150°C)
- 6 X WINDERS
- 6 X BANANA PLUGS (4mm, Double Screws to Secure Wire)
- 1 X SCREWDRIVER
- 6 X HEAT SHRINK
- 6 X CHA ISOLATION RINGS
- 6 X ALUMINUM CRIMPING LOOP SLEEVES
With SOLDER Banana Plugs
- 1 X 100' Tinned Copper KEVLAR PTFE (Teflon) (-70°C to 150°C)
- 6 X WINDERS
- 6 X BANANA PLUGS (4mm, SOLDERING HOLE to Secure Wire)
- 6 X HEAT SHRINK
- 6 X CHA ISOLATION RINGS
- 6 X ALUMINUM CRIMPING LOOP SLEEVES
