Paradan Radio Power Strip 6 · Power
A battery, charger, controller, solar panel, filter, or station-power component.
Why operators make room for it
Build operating time into the field plan
Operating time is not an abstract battery number when the activation, emergency net, or camping trip is still underway.
That is where Paradan Radio Power Strip 6 enters the kit. Neaten up your station with this 40 Ampere metered power strip. It is ideal in your station and especially for mobile and go-boxes. The horizontal design permits easy fan out from the six Anderson Powerpole outputs. The bright LED accurately displays both the DC Voltage and the Total Current in Amperes . It is housed in a sturdy metal case. The input is fused, and the strip is RF filtered. Anderson locking clips may be used to secure the connections.
For the operator, the goal is quiet and predictable endurance: enough correctly managed energy for the real radio load, with polarity, current, chemistry, charging, and protection handled deliberately.
Quick product reference
Key Specifications
- Product type
- Power
- Primary role
- A battery, charger, controller, solar panel, filter, or station-power component.
- Voltage
- 5 to 30Volts
- Current
- 40 Amperes total
- Connectors
- 40 amp Anderson Powerpoles
- Dimensions
- 7.1 x 2.2 x 1.0 inches. Powerpoles protrude 0.6 inches
- Weight
- 7.5 oz., 190 g
- Selection rule
- Match chemistry, voltage, current, connector, and charging source
- Runtime
- Depends on radio load and transmit duty cycle
Operator decision support
Plan the complete setup
See what this product is best suited for, what the documented setup needs, and the boundaries to confirm before deployment.
- Best for
Operating time is not an abstract battery number when the activation, emergency net, or camping trip is still underway.
- What else you need
Match chemistry, voltage, current, connector, and charging source
What an operator can do
- Match battery chemistry, voltage, current capacity, connectors, charger, and controller to the station load.
- Protect every circuit with the specified polarity, fuse, cable size, ventilation, and charging limits.
- Estimate operating time from the actual transmit duty cycle rather than a maximum nameplate figure alone.
Complete product details
Neaten up your station with this 40 Ampere metered power strip. It is ideal in your station and especially for mobile and go-boxes. The horizontal design permits easy fan out from the six Anderson Powerpole outputs. The bright LED accurately displays both the DC Voltage and the Total Current in Amperes. It is housed in a sturdy metal case. The input is fused, and the strip is RF filtered. Anderson locking clips may be used to secure the connections. The DC current is measured on the negative lead. The chassis is isolated from the negative lead. Includes 7 Powerpole pairs.
Specifications:
- Voltage: 5 to 30Volts
- Current: 40 Amperes total
- Meter: 7 Segment Red LED for Voltage, 7 segment Blue LED for current
- Meter Accuracy: Voltage: + 1 %, 0.1 volt, Current: + 3%, Residual <0.2 Amp
- Current Sense Resistor: 5 milliohms
- Fuses: 40A ATC included. It may be changed
- Connectors: 40 amp Anderson Powerpoles
- Enclosure: Black painted aluminum
- Dimensions: 7.1 x 2.2 x 1.0 inches. Powerpoles protrude 0.6 inches
- Mounting Holes: For #6 hardware
- Mounting Centers: 6.7 x 1.4 inches
- Weight: 7.5 oz., 190 g
