TDL WIRE (25') · Wire Antennas
A wire radiator or wire antenna system for documented horizontal, sloping, inverted-V, inverted-L, dipole, or NVIS use.
Why operators make room for it
Shape the antenna around the site—not the other way around
Wire antennas reward the operator who can read the site and choose a practical geometry before the first line is thrown.
CHA TDL WIRE (25') is the purpose-built wire used with the two CHA SS17 elements in the documented Tactical Delta Loop configuration, completing the loop geometry with a field-packable wire and winder.
That flexibility gives an operator a credible path from a compact field kit to a full-size radiator, while the official configuration still governs feedpoint, support, tuning, and safety choices.
Quick product reference
Key Specifications
- Product type
- Wire Antennas
- Primary role
- A wire radiator or wire antenna system for documented horizontal, sloping, inverted-V, inverted-L, dipole, or NVIS use.
- Published package contents
- 25' Tinned Copper KEVLAR PTFE (Teflon) (-70°C to 150°C) wire
- Winder
- Deployment role
- Documented wire-antenna configuration
- Support requirement
- Height, insulation, load, and guying depend on the completed deployment
- Antenna topology
- Use only the documented wire geometry and feedpoint arrangement for this product
- Support planning
- Verify required height, span, insulation, load, terrain, and guying for the selected geometry
- Tuner requirement
- Product- and band-specific; follow the assigned guide
Operator decision support
Plan the complete setup
See what this product is best suited for, what the documented setup needs, and the boundaries to confirm before deployment.
- Best for
Wire antennas reward the operator who can read the site and choose a practical geometry before the first line is thrown.
- What’s included
- 25' Tinned Copper KEVLAR PTFE (Teflon) (-70°C to 150°C) wire
- Winder
- What else you need
Verify required height, span, insulation, load, terrain, and guying for the selected geometry
What an operator can do
- Select a documented horizontal, sloping, inverted-V, inverted-L, dipole, or NVIS arrangement.
- Raise the wire with a support that satisfies the antenna guide's height, load, insulation, and guying limits.
- Keep balanced dipole configurations symmetrical and do not add radial or counterpoise accessories unless the guide explicitly requires them.
Complete product details
The antenna system consists of:
1 X 25' Tinned Copper KEVLAR PTFE (Teflon) (-70°C to 150°C) wire
1 X Winder
