A wire radiator or wire antenna system for documented horizontal, sloping, inverted-V, inverted-L, dipole, or NVIS use.
Quick product reference
Key Specifications
- Product type
- Wire Antennas
- Primary role
- A wire radiator or wire antenna system for documented horizontal, sloping, inverted-V, inverted-L, dipole, or NVIS use.
- Frequency
- o 7.0 – 7.3 MHz (40m), 14.0 – 14.35 MHz (20m), 21.0 - 21.45 MHz (15m), and 28.028.5 MHz (10m) without an antenna tuner. o 10.1 – 10.15 MHz (30m), 18.068 – 18.268 MHz (17m), and 24.89 – 24.99 MHz (12 m), and 28.5 – 29.7 MHz (10m FM band segment) with an antenna tuner
- Power
- 25 W SSB, 10W CW and Digital Modes
- Rf Connection
- BNC Female Connector
- Swr
- Less than 2.0:1 across covered bands, but subject to frequency, configuration, and location. Measured using 15-feet RG-316 with RFI Choke near analyzer
- Length
- 61 ½ ft
- Weight
- 3.4 oz. (96 Grams)
- Color
- High-visibility Orange and Black
- Personnel Requirements And Setup Time
- one operator, less than 10 minutes
- Published package contents
- End Transformer PCB Unit with integrated 49:1 matching transformer and BNC connector
- Approximately ORANGE 66.5 ft of 26 AWG PTFE Kevlar-reinforced antenna wire
- Integrated End Insulator and Line Winder system
- S-Carabiner clip for quick attachment
- Deployment role
- Documented wire-antenna configuration
- Support requirement
- Height, insulation, load, and guying depend on the completed deployment
What an operator can do
- Select a documented horizontal, sloping, inverted-V, inverted-L, dipole, or NVIS arrangement.
- Raise the wire with a support that satisfies the antenna guide's height, load, insulation, and guying limits.
- Keep balanced dipole configurations symmetrical and do not add radial or counterpoise accessories unless the guide explicitly requires them.
Balanced-system rule: Do not add radial or counterpoise accessories to a dipole configuration unless the official guide explicitly requires them.
Complete product details
Introducing the CHA LEFS FEATHER – Ultra-Light HF Performance, Reinvented
The CHA LEFS FEATHER (Lightweight End Fed Sloper) is a purpose-built portable HF antenna designed for operators who demand maximum performance with minimum weight.
Weighing only 3.4 oz (96 grams), this antenna is engineered for POTA, SOTA, backpacking, emergency communications, and rapid deployment where portability and reliability are critical.
What Makes the LEFS FEATHER Different
At the core of this antenna is what truly separates it from everything else in its class: the wire.
The LEFS Feather uses a custom high-quality 26 AWG PTFE Military Kevlar wire, not standard stranded copper.
This reinforced composite conductor features:
-
A 26 gauge copper radiator
-
An interwoven Kevlar core
-
A PTFE (Teflon) outer jacket
Advantages of the 26 AWG PTFE Kevlar Wire
This wire is engineered for real-world use and delivers performance and durability that standard antenna wire cannot match:
- It does not kink, eliminating memory and permanent bends during deployment and recovery
- The Kevlar core carries the mechanical load, protecting the copper from stretching and fatigue
- Extremely lightweight while maintaining high tensile strength
- PTFE insulation provides superior resistance to heat, abrasion, and harsh environments
- Reduced long-term failure compared to standard stranded copper
- High-visibility orange for faster deployment and easier recovery
This is a military-grade wire solution, built for operators who rely on their equipment.
Multi-Band Performance
The CHA LEFS Feather is a true End Fed Half Wave antenna that provides:
Operation without a tuner on:
Operation with a tuner on:
Built for Real-World Deployment
- High-performance 49:1 transformer with no compensation coil required
- Efficient sloper configuration for optimal field performance
- Single-operator setup in under 10 minutes
- Compact and highly portable for rapid deployment anywhere
What’s Included
Each CHA LEFS FEATHER package includes:
- End Transformer PCB Unit with integrated 49:1 matching transformer and BNC connector
- Approximately ORANGE 66.5 ft of 26 AWG PTFE Kevlar-reinforced antenna wire
- Integrated End Insulator and Line Winder system
- S-Carabiner clip for quick attachment
Everything is designed as a complete, ready-to-deploy system.
Specifications
- Frequency (no tuner):
- 7.0 – 7.3 MHz (40M)
- 14.0 – 14.35 MHz (20M)
- 21.0 – 21.45 MHz (15M)
- 28.0 – 28.5 MHz (10M)
- Frequency (with tuner):
- 10.1 – 10.15 MHz (30M)
- 18.068 – 18.268 MHz (17M)
- 24.89 – 24.99 MHz (12M)
- 28.5 – 29.7 MHz (10M FM segment)
- SWR:
- Less than 2.0:1 across supported bands (depending on environment and setup)
- Wire Type:
- 26 AWG PTFE Military Kevlar reinforced wire
- Setup Time:
- One operator, less than 10 minutes
Designed for Operators Who Move
Whether you are activating a summit, operating in a national park, preparing for emergency communications, or working within HOA restrictions, the LEFS Feather provides a full-size HF solution in an ultra-compact form factor.
The Bottom Line
The CHA LEFS FEATHER delivers:
- Advanced wire technology
- Reliable multi-band HF performance
- Fast and simple deployment
- True portability without compromise
This is not just a lightweight antenna. It is a serious HF tool built for real-world operators.
Versatile. Dependable. Stealth. Built to Last.